RRepairGraph
Electrolux · Washing machine

Electrolux Washing machine error E10

The washer detected a water-flow problem involving filling or drainage.

Error codeE10Also: E11, C1
!
Use cautionElectrolux states that E10, E11 and C1 indicate water-flow trouble such as low supply, blocked filters or hoses, or a drainage issue.

Coverage: Electrolux washers in regions using E10/E11/C1; exact interpretation may vary by model.

What this code usually means

Electrolux states that E10, E11 and C1 indicate water-flow trouble such as low supply, blocked filters or hoses, or a drainage issue.

BrandElectrolux
ApplianceWashing machine
ConfidenceManufacturer sourced

Safe checks, in order

  1. 1Confirm the household water supply is available and valves are open.
  2. 2Inspect visible inlet and drain hoses for kinks.
  3. 3Turn off water and power before cleaning any user-accessible hose filter described in the manual.

Common symptoms

  • Machine does not fill or fills slowly
  • Cycle stops during wash or rinse
  • A beep or flash pattern may accompany the code

Possible causes

  • Low or no water supply
  • Blocked inlet filter or hose
  • Drainage or hose-routing problem

Stop and get qualified help when

  • There is an active leak
  • Hoses or valves are damaged
  • The error persists with normal water pressure and clear accessible hoses
Primary sourceElectrolux Support — E10/E11/C1 ↗Verified 2026-07-17 · manufacturer