RRepairGraph
GE · Dishwasher · C1

Leak inspection

The pump-out portion of the drain cycle has exceeded two minutes.

Diagnostic nodeC1LEAK-CHECK
!
Use this as a diagnostic branchConfirm the exact model manual before ordering parts or opening the appliance.

Coverage: Selected GE electronic-control dishwashers; confirm the exact model manual.

GUIDANCE

Leak inspection for error C1

Leak inspection can help narrow the context of GE C1, but this page does not claim that the named system is the failed component. Begin with the manufacturer meaning — The pump-out portion of the drain cycle has exceeded two minutes. — then complete only accessible checks: Turn off power before inspecting drain connections.; Clean the accessible air gap and confirm the drain hose is not kinked.; Run the connected disposer and verify its dishwasher inlet is clear..

Safe sequence

  1. 1Turn off power before inspecting drain connections.
  2. 2Clean the accessible air gap and confirm the drain hose is not kinked.
  3. 3Run the connected disposer and verify its dishwasher inlet is clear.

Stop and get qualified help when

  • Water is leaking near electrical parts
  • The code persists after accessible drain checks
Primary sourceGE Appliances — dishwasher fault codes ↗Verified 2026-07-17 · manufacturer