RRepairGraph
Maytag · Washing machine · F9E1

Possible causes

The washer is unable to drain correctly within the expected time.

Diagnostic nodeF9E1CAUSES
!
Use this as a diagnostic branchConfirm the exact model manual before ordering parts or opening the appliance.

Coverage: Maytag front-load and selected top-load washers; use the exact model guide.

GUIDANCE

Possible causes for error F9E1

Published guidance and the observed behavior point to these possibilities: Kinked, clogged or incorrectly installed drain hose; Clogged pump filter where fitted; Blocked door-bellow drain holes. Check accessible conditions before considering a component fault.

Safe sequence

  1. 1Disconnect power before using any pump-filter access.
  2. 2Confirm the drain hose is not kinked, clogged or inserted too far into the standpipe.
  3. 3Follow the exact model instructions for cleaning the pump filter or door bellow.

Stop and get qualified help when

  • The lid or door remains locked with water inside
  • No user-accessible filter is documented
  • The drain pump makes abnormal mechanical noise
Primary sourceMaytag Product Help — F9E1 ↗Verified 2026-07-17 · manufacturer