RRepairGraph
Electrolux · Washing machine · E10

Possible causes

The washer detected a water-flow problem involving filling or drainage.

Diagnostic nodeE10CAUSES
!
Use this as a diagnostic branchConfirm the exact model manual before ordering parts or opening the appliance.

Coverage: Electrolux washers in regions using E10/E11/C1; exact interpretation may vary by model.

GUIDANCE

Possible causes for error E10

Published guidance and the observed behavior point to these possibilities: Low or no water supply; Blocked inlet filter or hose; Drainage or hose-routing problem. Check accessible conditions before considering a component fault.

Safe sequence

  1. 1Confirm the household water supply is available and valves are open.
  2. 2Inspect visible inlet and drain hoses for kinks.
  3. 3Turn off water and power before cleaning any user-accessible hose filter described in the manual.

Stop and get qualified help when

  • There is an active leak
  • Hoses or valves are damaged
  • The error persists with normal water pressure and clear accessible hoses
Primary sourceElectrolux Support — E10/E11/C1 ↗Verified 2026-07-17 · manufacturer