RRepairGraph
Electrolux · Washing machine · E10

Model coverage

The washer detected a water-flow problem involving filling or drainage.

Diagnostic nodeE10MODEL-COVERAGE
!
Use this as a diagnostic branchConfirm the exact model manual before ordering parts or opening the appliance.

Coverage: Electrolux washers in regions using E10/E11/C1; exact interpretation may vary by model.

GUIDANCE

Model coverage for error E10

Electrolux washers in regions using E10/E11/C1; exact interpretation may vary by model. Model suffixes and control revisions can change code definitions, so verify the complete model label before acting.

Safe sequence

  1. 1Confirm the household water supply is available and valves are open.
  2. 2Inspect visible inlet and drain hoses for kinks.
  3. 3Turn off water and power before cleaning any user-accessible hose filter described in the manual.

Stop and get qualified help when

  • There is an active leak
  • Hoses or valves are damaged
  • The error persists with normal water pressure and clear accessible hoses
Primary sourceElectrolux Support — E10/E11/C1 ↗Verified 2026-07-17 · manufacturer