RRepairGraph
Electrolux · Washing machine · E10

Safety boundaries

The washer detected a water-flow problem involving filling or drainage.

Diagnostic nodeE10SAFETY
!
Use this as a diagnostic branchConfirm the exact model manual before ordering parts or opening the appliance.

Coverage: Electrolux washers in regions using E10/E11/C1; exact interpretation may vary by model.

GUIDANCE

Safety boundaries for error E10

Disconnect power when instructed, control water where relevant, and stop before disassembly or electrical measurement. Specific stop conditions: There is an active leak; Hoses or valves are damaged; The error persists with normal water pressure and clear accessible hoses.

Safe sequence

  1. 1Confirm the household water supply is available and valves are open.
  2. 2Inspect visible inlet and drain hoses for kinks.
  3. 3Turn off water and power before cleaning any user-accessible hose filter described in the manual.

Stop and get qualified help when

  • There is an active leak
  • Hoses or valves are damaged
  • The error persists with normal water pressure and clear accessible hoses
Primary sourceElectrolux Support — E10/E11/C1 ↗Verified 2026-07-17 · manufacturer